LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Electronic Engine Controls) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2013 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

All engines 

  1. Wit the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. NOTE: PCM installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the Passive Anti-Theft System (PATS).

    Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. Refer to MODULE CONFIGURATION .

  3. Remove the LH fender splash shield. Refer to FRONT END BODY PANELS .

    1.6L GTDI, 2.0L GTDI engines 

  4. G08614005
  5. G08614006
  6. G08614007

    2.5L engine 

  7. G08614008
  8. G08614009
  9. G08614010
scientia non olet · About LEMON Manuals