Global Positioning System Module (GPSM): Removal
WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before beginning any service procedure in this service information, refer to SAFETY WARNINGS
. Failure to follow this instruction may result in serious personal injury.
-
NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation.
Upload the GPSM configuration information to the scan tool by following the scan tool on screen instructions.
- Remove the IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC)
- Release the 2 clips and remove the GPSM
.
- Disconnect the electrical connector.