Powertrain Control Module (PCM): Removal

All engines 

1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .

   Vehicles equipped with a 3.5L Gasoline Turbocharged Direct Injection (GTDI) engine 

2. Disconnect the 2 Powertrain Control Module (PCM) electrical connectors.
3. Disengage and remove the PCM  cover.
4. Remove the 2 PCM  -to-PCM  support bracket bolts and the PCM  .
5. If the PCM  support bracket is damaged, remove the nut and position the ground cable aside and remove the 2 PCM  stud bolts and slide the PCM  support bracket out of the bulkhead.

   Vehicles equipped with a 3.7L, 5.0L (4V) or 6.2L (2V) engine 

6. Disconnect the Powertrain Control Module (PCM) electrical connectors.
7. Remove the stud bolts, the PCM  and the gasket.