Front Controls Interface Module (FCIM)

DTC INDEX

DTC	Description	Action
B00D5:01	Restraint System Passenger Disable Indicator: General Electrical Failure	CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC B00D5:01 is retrieved again, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
B113C:11	Hazard switch illumination: Circuit Short To Ground	CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC B113C:11 is retrieved again, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
B1202:01	Restraint System Passenger Enable Indicator: General Electrical Failure	CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC B1202:01 is retrieved again, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U0155:00	Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information	GO to PINPOINT TEST AD .
U0257:00	Lost Communication With Front Controls/Display Interface Module: No Sub Type Information	GO to PINPOINT TEST AI .
U0423:00	Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information	RETRIEVE and FOLLOW DTCs present in the IPC . REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
U2013:63	Switch Pack: Circuit/Component Protection Time-Out	CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U2013:63 is retrieved again, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:41	Control Module: General Checksum Failure	CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:42	Control Module: General Memory Failure	CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:42 is retrieved again, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3003:16	Battery Voltage: Circuit Voltage Below Threshold	GO to PINPOINT TEST AJ .
U3003:17	Battery Voltage: Circuit Voltage Above Threshold	GO to PINPOINT TEST AK .