LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> F-150 FX4, 2D Pickup >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Passive Anti-Theft System (Pats) >> General Procedures >> MyKey® Programming >> Program a MyKey® >> Clear MyKey® >> With Base Message Center
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Base Message Center

  1. NOTE: This procedure is used to clear the MyKey® feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.

    Insert an admin key into the ignition and turn the key to the RUN position.

  2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
  3. Press and release the RESET button until HOLD RESET TO CONFIRM CLEAR is displayed.
  4. Press and hold the RESET button until ALL MYKEYS CLEARED is displayed.
    • A MyKey® can also be cleared during the same key cycle that it was programmed by following Steps  2,  3 and 4 of this procedure.