With Base Message Center
NOTE:
The following features can be restricted on a MyKey®:
- audio volume level set to a pre-determined level (45% of the maximum volume)
- maximum speed limit of 130 km/h (80 mph) on or off
- speed alert chimes set for 75, or 90 or 105 km/h (45, or 55 or 65 mph)
- AdvanceTrac® always on feature turned on or off
- Insert an admin key into the ignition and turn the key to the RUN position.
- Press the SETUP button until RESET FOR MYKEY SETUP is displayed.
- Press and release the RESET button to display the MyKey® setup menus. The first programmable feature is: MYKEY MAX MPH < 80 MPH > OFF.
- If you do not want to change the status of a feature that appears, press and release SETUP to accept the current setting and display the next programmable feature.
- If you want to change the status of the feature that is displayed, press RESET to turn a feature on/off (or toggle between choices). After the feature selection has been made, press and release SETUP to accept the current setting and display the next programmable feature.
- Repeat the process for the next features:
- MYKEY MPH TONES 45 55 65 < OFF > (choose the desired speed for the chime to sound)
- MYKEY VOLUME LIMIT < ON > OFF (choose the audio volume to be limited to 45%)
- MYKEY ADVTRAC CTRL ON < OFF > (choose for the AdvanceTrac® to be automatically locked on or able to be turned on or off by the MyKey® driver)