Instrument Panel Cluster (IPC) Configuration For Trailer Brake Control (TBC) Functionality

The same IPC  is used for vehicles with and without the TBC  option. TBC  functionality is enabled or disabled using the scan tool. If the vehicle is equipped with a TBC  module, but the IPC  was not configured for TBC  , the TBC  module shuts down, no TBC  information is displayed in the message center and DTC U2202 sets in the TBC  module.

If the IPC  is configured for TBC  , but the vehicle is not equipped with a TBC  module, TRAILER BRAKE MODULE FAULT is displayed in the message center. This symptom could occur if a replacement IPC  was installed, but not configured correctly. For information on the TBC  programmable parameter, refer to PROGRAMMABLE PARAMETERS  below.