Component Testing Procedure - Roof Opening Panel Control Switch
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt circuit | 12 and 3 | Pull Tilt (UP) | Closed circuit |
| 12 and 8 | |||
| 12 and 3 | Press Tilt (DOWN) | Closed circuit | |
| 12 and 6 | |||
| Slide circuit | 12 and 8 | Pull Slide (UP) | Closed circuit |
| 12 and 6 | Press Slide (DOWN) | Closed circuit |