Starting System: Specifications
GENERAL SPECIFICATIONS
| Item | Specification | ||||
|---|---|---|---|---|---|
| Normal engine cranking speed | 140-220 rpm | ||||
| Starter motor maximum load | 800 amps (1) | ||||
| Starter motor maximum voltage drop (engine at normal operating temperature) | 0.5 volt | ||||
| Starter motor minimum stall torque (at 5 volts) | 14.7 Nm (10.8 lb-ft) | ||||
| Starter motor no load current draw | 60-84 amps | ||||
| Starter motor normal load current draw | 130-220 amps (2) | ||||
|
|||||
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Starter motor mounting bolts - 3.5L Gasoline Turbocharged Direct Injection (GTDI) and 3.7L | 48 | 35 | - |
| Starter motor mounting bolts - 5.0L (4V) and 6.2L (2V) | 25 | 18 | - |
| Starter motor mounting stud bolts - 5.0L (4V) and 6.2L (2V) | 25 | 18 | - |
| Starter motor ground cable nut - 5.0L (4V) and 6.2L (2V) | 25 | 18 | - |
| Starter solenoid B+ terminal nut | 12 | - | 106 |
| Starter solenoid S-terminal nut | 5 | - | 44 |