Windshield Washer

The wiper/washer switch is provided voltage when the ignition is ON. The voltage passes through 2 internal switches and is routed through the BCM  to the washer pump. When the washer is not activated, voltage is present on both circuits to the washer pump. When the windshield washer switch is activated, ground is provided on one of the circuits instead of voltage, activating the washer pump.

The BCM  monitors for ground on both circuits as they pass through it. When the washer switch is activated, one of the circuits is routed to ground indicating a windshield washer request. When BCM  detects the request, it activates the windshield wipers in low speed mode and the washer pump for as long as the washer request is detected. The wipers wipe 4 more times after the washer pump turns off. After a brief pause, an additional courtesy wipe follows.