Powertrain/Drivetrain Mount Neutralizing: Adjustment
NOTE:
Refer to the appropriate Engine article
and procedure for special instructions on loosening and tightening mount fasteners.
-
WARNING: Before beginning any service procedure, refer to Safety Warnings in GENERAL INFORMATION . Failure to follow this instruction may result in serious personal injury.
Refer to: HEALTH AND SAFETY PRECAUTIONS .
- Refer to: JACKING AND LIFTING - OVERVIEW .
- Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
- Lower the vehicle.
-
NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.
Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
- Raise and support the vehicle.
- Tighten the powertrain/drivetrain mount fasteners.
- Lower the vehicle.
- Test the system for normal operation.