Climate Control System - Vehicles With: Electronic Manual Temperature Control (EMTC) - Overview: Overview
WARNING: This page is about a different car, the 2015 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
The climate control system, not equipped with A/C, consists of the following components:
- Heater core and evaporator core housing
- HVAC control module
- IPC
- Air distribution door actuator
- Air inlet door actuator
- Temperature door actuator
- Blower motor
- Blower motor resistor
The climate control system, equipped with A/C, consists of the following components:
- A/C compressor
- A/C compressor clutch assembly
- A/C condenser core
- A/C evaporator core
- Receiver/drier
- Connecting refrigerant lines
- Thermostatic Expansion Valve (TXV)
- Heater core and evaporator core housing
- HVAC control module
- IPC
- Ambient air temperature (AAT) sensor
- Evaporator temperature sensor
- Air distribution door actuator
- Air inlet door actuator
- Temperature door actuator
- Blower motor
- Blower motor resistor
The EMTC system heats or cools the vehicle interior depending on the HVAC control panel selection.
- The control panel selection determines heating or cooling, air distribution and enables blower motor operation.
- The temperature control setting determines the outlet air temperature.
- The fan speed control varies the blower motor speed or to switch the fan off.
- During A/C operation (if equipped), the system reduces the relative humidity of the air inside the vehicle.