LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Windows And Glass - Glass, Frames And Mechanisms (With One Touch Up & Down Front Windows) -- (Except Electric) >> Description And Operation >> Glass, Frames and Mechanisms - System Operation and Component Description >> System Operation >> Network Message Chart - Rear Window Defrost >> Right Hand (RH) Window Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Right Hand (RH) Window Operation

The master window control switch communicates to the DDM  through a private LIN  . The DDM  communicates to the PDM  through the Medium Speed Controller Area Network (MS-CAN).

When commanded by the master window control switch or the RH  window control switch, the PDM  supplies power and ground to operate the RH  front window in the desired direction. The PDM  monitors window glass position through feedback from 2 Hall-effect sensors (integral to the power window motor). If there is an issue with the Hall-effect sensor circuit(s), the PDM  only moves the window in 500 ms intervals (the window control switch must be released and activated again to move the window).



The master window control switch communicates to the DDM  through a private LIN  . The DDM  communicates to the PDM  through the Medium Speed Controller Area Network (MS-CAN). The PDM  communicates to the Passenger Rear Door Module (PRDM) through a private LIN  .

When commanded by the master window control switch or the RH  rear window control switch, the Passenger Rear Door Module (PRDM) supplies power and ground to operate the RH  rear window in the desired direction. The Passenger Rear Door Module (PRDM) monitors window glass position through feedback from 2 Hall-effect sensors (integral to the power window motor). If there is an issue with the Hall-effect sensor circuit(s), the Passenger Rear Door Module (PRDM) only moves the window in 500 ms intervals (the window control switch must be released and activated again to move the window).