LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Pinpoint Test Do: Barometric Pressure (BARO) Sensor Through Pinpoint Test FD: Brake Pedal Inputs - (Except Diesel & Hybrid) >> PINPOINT TEST FA: Ambient Air Temperature (AAT) Sensor >> Introduction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PINPOINT TEST FA: Ambient Air Temperature (AAT) Sensor: Introduction

This pinpoint test is intended to diagnose the following:

Pin Circuit
2 SIGRTN (Signal Return)
1 AAT (Ambient Air Temperature)
Fig 2: Identifying Right Exterior Rear View Mirror Assembly Connector Terminals
G09137507Courtesy of FORD MOTOR CO.
Pin Circuit
10 SIGRTN (Signal Return)
9 AAT (Ambient Air Temperature)
Fig 3: Identifying Instrument Panel Cluster Connector Terminals
G07431384Courtesy of FORD MOTOR CO.
Pin Circuit
19 SIGRTN (Signal Return)
20 AAT (Ambient Air Temperature)

Powertrain Control Module (PCM) Connector 

For PCM connector views or reference values, refer to SECTION 6: REFERENCE VALUES .

Vehicle Connector Pin Circuit
Edge 2.0L,
Explorer 2.0L
154 PIN B21
B35
SIGRTN
AAT
Edge 3.5L,
Edge 3.7L,
MKX
190-PIN B56
E29
SIGRTN
AAT
Escape 1.6L,
Escape 2.0L,
Explorer GTDI 3.5L,
Flex GTDI 3.5L,
Fusion 1.5L,
Fusion 2.0L,
MKS 3.5L,
MKT 2.0L,
MKT 3.5L,
MKZ 2.0L,
Taurus 2.0L,
Taurus GTDI 3.5L,
Transit Connect 1.6L
198 PIN B18
B51
SIGRTN
AAT
F-150 3.5L 198 PIN B34
B51
SIGRTN
AAT
Focus 154 PIN B34
B35
SIGRTN
AAT
Fusion 1.6L 198 PIN E17, E34
B51
SIGRTN
AAT
Motorhome/Stripped Chassis/Step Van 190-PIN B56 SIGRTN
All other vehicles 190-PIN B56
B17
SIGRTN
AAT