Pinpoint Test E: The One-Touch Up Feature Is Inoperative
- E1 INITIALIZE THE SUSPECT POWER WINDOW
- Carry out the initialization procedure on the suspect power window.
REFER to: POWER DOOR WINDOW INITIALIZATION .
Is the one-touch up/down feature operating correctly?
- Yes : The system is operating normally at this time. The window lost initialization.
- No
: For an inoperative LH
front window, INSTALL a new DDM
.
For an inoperative LH rear window, INSTALL a new Driver Rear Door Module (DRDM).
For an inoperative RH front window, INSTALL a new PDM .
For an inoperative RH rear window, INSTALL a new Passenger Rear Door Module (PRDM).
REFER to: DOOR MODULE .
- Carry out the initialization procedure on the suspect power window.