Global Positioning System Module (GPSM) - Premium DTC Table

DTC INDEX

DTC	Description	Action
U0140:00	Lost Communication With Body Control Module: No Sub Type Information	GO to PINPOINT TEST AA
U0155:00	Lost Communication With IPC Module: No Sub Type Information	GO to PINPOINT TEST AB
U0422:00	Invalid Data Received from Body Control Module: No Sub Type Information	RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the BCM . REFER to: BODY CONTROL MODULE (BCM) .
U0423:00	Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information	RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC . REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
U3000:09	Control Module: Component Failure	CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:09 is retrieved again, PERFORM a battery reset by disconnecting the battery for 5 minutes, then reconnecting it. CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:09 is retrieved again, INSTALL a new GPSM . REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3000:41	Control Module: General Checksum Failure	CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new GPSM . REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3000:42	Control Module: General Memory Failure	CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:42 is retrieved again, INSTALL a new GPSM . REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3003:16	Battery Voltage: Circuit Voltage Below Threshold	GO to PINPOINT TEST AF
U3003:17	Battery Voltage: Circuit Voltage Above Threshold	GO to PINPOINT TEST AG