Pinpoint Test G : The BLIS® And CTA System Cannot Be Turned Off In The IPC Message Center: Notes

WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

Pinpoint Test G: The Blind Spot Information System (BLIS®) and Cross Traffic Alert (CTA) System Cannot Be Turned Off In The Instrument Panel Cluster (IPC) Message Center

Diagnostic Overview

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.

Refer to Wiring Diagrams Vehicle Emergency Messaging System , for schematic and connector information.

Normal Operation and Fault Conditions

The BLIS® and/or CTA system are turned off for one key cycle only when using the message center switches. Permanently disabling the BLIS® and/or CTA system is carried out in the Integrated Diagnostic System (IDS) programmable parameters menu.

REFER to BLIS® and CTA Message Display in Blind Spot Monitoring .

Possible Sources

Wiring, terminals and connectors
IPC