Occupant Classification System Module (OCSM) DTC Chart

OCSM DTC DESCRIPTION

DTC	Description	Action
B0061:11	Passenger Seatbelt Tension Sensor: Circuit Short To Ground	REFER to: PINPOINT TEST - DTC: KK .
B0061:12	Passenger Seatbelt Tension Sensor: Circuit Short To Battery	REFER to: PINPOINT TEST - DTC: KK .
B0061:13	Passenger Seatbelt Tension Sensor: Circuit Open	REFER to: PINPOINT TEST - DTC: KK .
B0061:1C	Passenger Seatbelt Tension Sensor: Circuit Voltage Out of Range	REFER to: PINPOINT TEST - DTC: KK .
B0061:49	Passenger Seatbelt Tension Sensor: Internal Electronic Failure	REFER to: PINPOINT TEST - DTC: KK .
B00C0:11	Passenger Seat Occupant Classification Sensor "A":) Circuit Short to Ground	INSPECT the OCS sensor pressure hose and pressure hose routing. VERIFY the hose is not twisted, pinched or damaged and that the hose is routed correctly. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR . If a concern is found, REPAIR as needed. If no concern is found, CYCLE the ignition and REPEAT the OCSM self-test. If DTC B00C0:11 returns, INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
B00C0:1A	Passenger Seat Occupant Classification Sensor "A":) Circuit Resistance Below Threshold	INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
B00C0:49	Passenger Seat Occupant Classification Sensor "A": Internal Electronic Failure	INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
B00C1:11	Passenger Seat Occupant Classification Sensor "B": Circuit Short to Ground	INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
B00C1:12	Passenger Seat Occupant Classification Sensor "B": Circuit Short to Battery	INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
B00C1:49	Passenger Seat Occupant Classification Sensor "B": Internal Electronic Failure	INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
B00C2:11	Passenger Seat Occupant Classification Sensor "C": Circuit Short to Ground	REFER to: PINPOINT TEST - DTC: LL .
B00C2:12	Passenger Seat Occupant Classification Sensor "C": Circuit Short to Battery	REFER to: PINPOINT TEST - DTC: LL .
B1193:00	Crash Event Storage Full and Locked: No Sub Type Information	CLEAR the OCSM Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC B1193:00 returns, INSTALL a new OCS sensor. INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
U0100:00	Lost Communication with ECM/PCM A: No Sub Type Information	REFER to: PINPOINT TEST - DTC: SS .
U0151:00	Lost Communication with Restraints Control Module: No Sub Type Information	REFER to: PINPOINT TEST - DTC: NN .
U0401:00	Invalid Data Received from ECM/PCM A: No Sub Type Information	CARRY OUT the PCM self-test. REFER to the "Engine Controls" article or the appropriate service information article. Refer to the appropriate article for the procedure.
U3000:46	Control Module: Calibration/Parameter Memory Failure	INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
U3000:49	Control Module: Internal Electronic Failure	INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
U3000:54	Control Module: Missing Calibration	Using a diagnostic scan tool, CARRY OUT the OCS Reset. FOLLOW all instructions on the diagnostic scan tool. If the OCS Reset was not successful, VERIFY correct installation of the OCS. VERIFY the pressure sensor hose is correctly routed and CORRECT the installation as necessary. REPEAT the self-test. If DTC U3000:54 is still present, INSTALL a new OCS sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR .
U3003:16	Battery Voltage: Circuit Voltage Below Threshold	REFER to: PINPOINT TEST - DTC: JJ .
U3003:17	Battery Voltage: Circuit Voltage Above Threshold	REFER to: PINPOINT TEST - DTC: JJ .