BCM DTC Table
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B11DB:02 | Battery Monitoring Module "A", General Signal Failure | GO to PINPOINT TEST F |
| B11DB:08 | Battery Monitoring Module "A", Bus Signal/Message Failure | GO to PINPOINT TEST F |
| B11DB:11 | Battery Monitoring Module "A", Circuit Short To Ground | GO to PINPOINT TEST F |
| B11DB:49 | Battery Monitoring Module "A", Internal Electronic Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the BCM self test. If Diagnostic Trouble Codes (DTCs) B11DB:49 is retrieved, INSTALL new Battery Monitoring Sensor. REFER to: BATTERY MONITORING SENSOR . |
| B11DB:55 | Battery Monitoring Module "A", Not Configured | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. INSTALL As-Built data from Professional Technician Society (PTS) following diagnostic scan tool instructions under Module Programming>As-Built. |
| B11DB:9A | Battery Monitoring Module "A", Component or System Operating Conditions | GO to PINPOINT TEST F |
| B130C:12 | Load Shed Control Circuit Short To Battery | GO to PINPOINT TEST E |
| B130C:14 | Load Shed Control Circuit Short To Ground or Open | GO to PINPOINT TEST E |
| B1438:03 | Battery Current Sensor, FM/PWM Failure | GO to PINPOINT TEST E |
| U1007:31 | Lost Communication With Battery Monitoring Sensor "A": No Signal | GO to PINPOINT TEST F |
| All Other DTCs | - | REFER to: BODY CONTROL MODULE (BCM) . |