Tracking And Blocking System (Tbs) Module
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B119F:04 | GPS Antenna: System Internal Failure | INSTALL a new Tracking and Blocking System (TBS) module GPS antenna. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| B119F:11 | GPS Antenna: Circuit Short To Ground | INSTALL a new Tracking and Blocking System (TBS) module GPS antenna. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| B119F:12 | GPS Antenna: Circuit Short To Battery | INSTALL a new Tracking and Blocking System (TBS) module GPS antenna. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| B119F:13 | GPS Antenna: Circuit Open | INSTALL a new Tracking and Blocking System (TBS) module GPS antenna. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| B1475:56 | Subscriber Identity Module (SIM): Invalid/Incompatible Configuration | INSTALL a new Tracking and Blocking System (TBS) module. |
| B1475:96 | Subscriber Identity Module (SIM): Component Internal Failure | INSTALL a new Tracking and Blocking System (TBS) module. |
| B1477:11 | Backup Battery: Circuit Short To Ground |
|
| B1477:13 | Backup Battery: Circuit Open |
|
| B1477:16 | Backup Battery: Circuit Voltage Below Threshold |
|
| B1477:17 | Backup Battery: Circuit Voltage Above Threshold |
|
| B1477:96 | Backup Battery: Component Internal Failure |
|
| B1477:98 | Backup Battery: Component or System Over Temperature |
|
| B1477:9A | Backup Battery: Component or System Operating Conditions |
|
| B1478:09 | Global System For Mobile Communications (GSM) Block: Component Failure |
|
| C113A:14 | Wakeup Control: Circuit Short To Ground or Open | GO to PINPOINT TEST F |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to PINPOINT TEST G |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to PINPOINT TEST H |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST I |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to PINPOINT TEST J |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST K |
| U0401:00 | Invalid Data Received from ECM/PCM A: No Sub Type Information | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM. Refer to the ELECTRONIC ENGINE CONTROLS PCM DTC CHART . Refer to the appropriate Engine Article for the procedure. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BCM. REFER to: BODY CONTROL MODULE (BCM) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CARRY out the PMI using As-Built data. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CARRY out the PMI using As-Built data. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | INSTALL a new Tracking and Blocking System (TBS) module. |
| U2300:55 | Central Configuration: Not Configured | CARRY out the PMI using As-Built data. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| U2300:56 | Central Configuration: Invalid/Incompatible Configuration | CARRY out the PMI using As-Built data. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| U2300:64 | Central Configuration: Signal Plausibility Failure | CARRY out the PMI using As-Built data. CLEAR the Diagnostic Trouble Codes (DTCs) and repeat the self-test. If the DTC returns, INSTALL a new Tracking and Blocking System (TBS) module. |
| U3000:04 | Control Module: System Internal Failure | INSTALL a new Tracking and Blocking System (TBS) module. |
| U3002:62 | Vehicle Identification Number: Signal Compare Failure | PERFORM a Parameter Reset. REFER to: ANTI-THEFT SECURITY ACCESS . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST L |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST M |