Body Control Module B (BCM-B): Removal
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Prior to the removal of the module, it is necessary to upload the module configuration information to a scan tool. This information must be downloaded into the new Body Control Module B (BCM-B) after installation. For additional information, refer to
MODULE CONFIGURATION
.
-
NOTE: If the BCM-B is being replaced, follow this step. If the BCM-B is not being replaced, go to Step 2.
Upload the module configuration information from the BCM-B into the scan tool. For additional information, refer to MODULE CONFIGURATION .
- From the right side of the luggage compartment, remove the pushpin and position aside the RH luggage compartment trim cover.
- Remove the BCM-B bracket assembly nuts and position the assembly for access to the BCM-B.
- Vehicle with navigation remove 4 nuts.
- Vehicle without navigation remove 3 nuts.
- Disconnect the 2 BCM-B electrical connectors.
- Remove the 2 nuts and the BCM-B.