Component Testing Procedure
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Interior dome Circuit | 4 and 2 4 and 7 |
Dome lamp on | Closed circuit |
| 4 and 2 4 and 3 |
Dome lamp off | Closed circuit | |
| Interior dimmer Circuit | 4 and 7 | Dimmer Up/Dome lamp on | Closed circuit |
| 4 and 3 | Dimmer Down/Dome lamp off | Closed circuit | |
| Interior dome/dimmer Circuit | 4 and 2 4 and 3 4 and 7 |
At rest | Open circuit |