DTC U0428: Invalid Data Received From Steering Angle Sensor Module

Failure	Action
81	RETRIEVE and REPAIR all non-network DTCs in the SCCM. REFER to Steering Wheel And Column Electrical Components . If no DTCs set in the SCCM, the DTC may be caused by an intermittent concern. SET the ignition to OFF. DISCONNECT and INSPECT all SCCM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
82	RETRIEVE and REPAIR all non-network DTCs in the SCCM. REFER to Steering Wheel And Column Electrical Components . If no DTCs set in the SCCM, the DTC may be caused by an intermittent concern. SET the ignition to OFF. DISCONNECT and INSPECT all SCCM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
83	RETRIEVE and REPAIR all non-network DTCs in the SCCM. REFER to Steering Wheel And Column Electrical Components . If no DTCs set in the SCCM, the DTC may be caused by an intermittent concern. SET the ignition to OFF. DISCONNECT and INSPECT all SCCM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.