Powertrain Drivetrain Mount Neutralizing

Adjustment 

• 1.
  
  Refer to: Jacking and Lifting - Overview .

• 2.
  
  Refer to: Battery Tray .

• 3.
  
  Loosen, but do not remove, the 2 engine mount bolts.

Courtesy of FORD MOTOR COMPANY

• 4.
  
  

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Loosen, but do not remove the 2 roll restrictor bolts. Verify that the roll restrictor is loose.

Courtesy of FORD MOTOR COMPANY

• 6.
  
  
  NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

  Center the engine and transmission mounts to the center of the slots in the mount brackets.

Courtesy of FORD MOTOR COMPANY

• 7.
  
  Torque: 59 lb.ft (80 Nm)

Courtesy of FORD MOTOR COMPANY

• 8.
  
  Torque: 35 lb.ft (48 Nm)

Courtesy of FORD MOTOR COMPANY

• 9.
  
  
  NOTE: Rock the powertrain/drivetrain assembly forward and rearward to ensure the roll restrictor is not bound.

  Torque: 92 lb.ft (125 Nm)

Courtesy of FORD MOTOR COMPANY

• 10.
  
  Refer to: Battery Tray .

• 11.
  
  Test the system for normal operation.