Powertrain Control Module (PCM): Removal
- 1.
With the vehicle in N, position it on a hoist. Refer to: Jacking and Lifting - Overview .
- 2.NOTE: Powertrain Control Module (PCM) installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the PATS.NOTE: This step is only necessary when installing a new component.
Download the module information to the diagnostic tool using the Programmable Modules Installation routine. Refer to: Module Configuration - System Operation and Component Description . Use the General Equipment: Ford Diagnostic Equipment
- 3.
Remove the LHF fender splash shield. Refer to: Fender Splash Shield .