Component Description

WARNING: This page is about a different car, the 2015 Ford C-Max. However, it is still accessible from the selected car via links, so may be relevant.

BCM

The BCM is a multifunction module that requires PMI when replaced. Refer to: Module Configuration - System Operation and Component Description .

RFA

The RFA module is a multifunction module that does not require PMI when replaced. Refer to: Module Configuration - System Operation and Component Description .

DDM or PDM

The DDM and PDM control the operation of the power door locks, power windows, and the exterior rear view mirrors. They communicate with each other, the BCM, and other modules over the MS-CAN. They also send commands and receive feedback from the Driver Rear Door Module (DRDM) and Passenger Rear Door Module (PRDM) over a private LIN for each module.

Refer to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
Refer to: Glass, Frames and Mechanisms - System Operation and Component Description .
Refer to: Rear View Mirrors - System Operation and Component Description .

The DDM and PDM do not require PMI when replaced.

Driver Rear Door Module (DRDM) or Passenger Rear Door Module (PRDM)

The Driver Rear Door Module (DRDM) and Passenger Rear Door Module (PRDM) control the operation of the power door locks and power windows in the rear doors. They receive commands and send feedback with the corresponding DDM or PDM over a private LIN for each module.

The Driver Rear Door Module (DRDM) and Passenger Rear Door Module (PRDM) do not require PMI when replaced.