Remote Function Actuator (RFA) Module: Removal

WARNING: This page is about a different car, the 2015 Ford C-Max. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: If installing a new RFA module, verify at least 2 passive keys are available prior to carrying out this procedure.

1.

Remove the LH loadspace trim panel. Refer to: Loadspace Trim Panel LH .

2.

Disconnect the 5 electrical connectors, remove the 2 retainers and the RFA module.

Courtesy of FORD MOTOR COMPANY