Transfer Case
WARNING: This page is about a different variant/trim than selected.
All vehicles
- 1.
Remove the rear driveshaft. Refer to: Rear Driveshaft
.
1.6L
- 2.
Remove the CAC tube clamps and CAC tube.
 Courtesy of FORD MOTOR COMPANY
|
2.0L
- 3.
Remove the CAC tube clamps and CAC tube.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Remove the catalytic converter. Refer to: Catalytic Converter
.
All vehicles
- 5.
Remove the PTU heat shield bolts and the PTU heat shield.
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Remove the RH front halfshaft. Refer to: Front Halfshaft RH
.
- 7.
Disconnect the PTU vent hose.
 Courtesy of FORD MOTOR COMPANY
|
- 8.
Remove the PTU support bracket bolts and the PTU support bracket.
 Courtesy of FORD MOTOR COMPANY
|
- 9.
Remove and discard the upper PTU bolts.
 Courtesy of FORD MOTOR COMPANY
|
- 10.
Remove and discard the lower PTU bolts.
 Courtesy of FORD MOTOR COMPANY
|
- 11.
Remove the PTU.
 Courtesy of FORD MOTOR COMPANY
|
- 12.
Remove and discard the PTU compression seal.
 Courtesy of FORD MOTOR COMPANY
|