DTC U0100: Lost Communication with ECM/PCM A: Description

The PSCM monitors the HS-CAN messages when the ignition has been on for more than 5 seconds, the voltage to the PSCM is greater than 6.5 volts and there are no DTCs present inhibiting PSCM operation.

• DTC U0100:00 (Lost Communication with ECM/PCM A: No Sub Type Information) - This DTC sets if communications between the PSCM and the PCM fail. If the accelerator pedal position, engine speed, engine torque, transmission gear or vehicle speed message is missing for 1 to 5 seconds, this DTC is set.