LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Flex SE >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel And Console >> Removal And Installation >> Compressor Driver Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Compressor Driver Module

NOTE: For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD .

  1. 1.

    Remove the rear floor console refrigerator. Refer to Refrigerator .

  1. 2.

    NOTE: Do not bend the condenser tubes. The screwdriver must fit between the condenser tubes or damage may occur to the refrigerator.

    Using a long thin screwdriver, remove the philips screw from the compressor driver module mounting bracket.

GFD59813Courtesy of FORD MOTOR COMPANY

  1. 3.

    Disconnect the upper electrical connector from the compressor driver module.
GFD59814Courtesy of FORD MOTOR COMPANY

  1. 4.

    Rotate the compressor driver module to the right and remove from the mounting bracket.
GFD59815Courtesy of FORD MOTOR COMPANY

  1. 5.

    Disconnect the lower electrical connector from the compressor driver module.
GFD59816Courtesy of FORD MOTOR COMPANY

  1. 6.

    Disconnect the compressor driver module-to-refrigerator electrical connector.
GFD59817Courtesy of FORD MOTOR COMPANY

  1. 7.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals