Air Conditioning Control Module (ACCM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| P0562:00 | System Voltage Low: No Sub Type Information | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the DC to DC Converter Control Module (DC/DC). Refer to: Direct Current/Direct Current (DC/DC) Converter Control Module . If there are no Diagnostic Trouble Codes (DTCs) in the DC to DC Converter Control Module (DC/DC), GO to Pinpoint Test A |
| P0563:00 | System Voltage High: No Sub Type Information | REFER to: Direct Current/Direct Current (DC/DC) Converter Control Module . |
| P0AFA:16 | Hybrid/EV Battery System Voltage Low: Circuit Voltage Below Threshold | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BECM, PCM, or TCM. For BECM, REFER to: High Voltage Battery, Mounting and Cables . PCM, REFER to: Electric Powertrain Control . TCM, REFER to: Transmission Control Module (TCM) . |
| P0AFB:17 | Hybrid/EV Battery System Voltage High: Circuit Voltage Above Threshold | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BECM, PCM, or TCM. For BECM, REFER to: High Voltage Battery, Mounting and Cables . PCM, REFER to: Electric Powertrain Control . TCM, REFER to: Transmission Control Module (TCM) . |
| P0AFB:1C | Hybrid/EV Battery System Voltage High: Circuit Voltage Out of Range | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BECM, PCM, or TCM. For BECM, REFER to: High Voltage Battery, Mounting and Cables . PCM, REFER to: Electric Powertrain Control . TCM, REFER to: Transmission Control Module (TCM) . |
| B11EE:19 | A/C Compressor: Circuit Current Above Threshold | GO to Pinpoint Test H |
| B11EE:41 | A/C Compressor: General Checksum Failure | INSTALL a new A/C Electric Compressor. Refer to: Air Conditioning (A/C) Electric Compressor . |
| B11EE:4B | A/C Compressor: Over Temperature | VERIFY the refrigerant charge level. REFER to SPECIFICATIONS . If the charge level is low, RECHARGE the system, CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. TEST the system for normal operation. If the DTC returns, INSTALL a new A/C Electric Compressor. Refer to: Air Conditioning (A/C) Electric Compressor . |
| B11EE:92 | A/C Compressor: Performance or Incorrect Operation | GO to Pinpoint Test H |
| U0001:88 | High Speed CAN Communication Bus: Bus off | The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC). VERIFY the integrity of the connectors and wiring. |
| U0140:00 | Lost Communication with Body Control Module: No Sub Type Information | GO to Pinpoint Test C |
| U0293:00 | Lost Communication with Hybrid/EV Powertrain Control Module: No Sub Type Information | GO to Pinpoint Test T |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BCM. Refer to: Body Control Module (BCM) . |
| U3000:04 | Control Module: System Internal Failure | INSTALL a new A/C electric compressor. Refer to: Air Conditioning (A/C) Electric Compressor . |
| U3000:42 | Control Module: General Memory Failure | INSTALL a new A/C electric compressor. Refer to: Air Conditioning (A/C) Electric Compressor . |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new A/C electric compressor. Refer to: Air Conditioning (A/C) Electric Compressor . |