P0602 - Powertrain Control Module Programming Error - DTC Chart
P0602 - POWERTRAIN CONTROL MODULE PROGRAMMING ERROR - DTC CHART
| Description: This DTC sets when a programming error within the vehicle identification (VID) block is detected. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: The VID block must be programmed. Refer to service information FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block For A Replacement PCM. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the service information Description, Possible Causes and Diagnostic Aids for the DTC. | ||