P0610 - Control Module Vehicle Options Error - DTC Chart
P0610 - CONTROL MODULE VEHICLE OPTIONS ERROR - DTC CHART
| Description: This DTC sets when a vehicle options error occurs in the PCM. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to service information FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the service information Description, Possible Causes and Diagnostic Aids for the DTC. | ||