P0A1A - Generator Control Module - DTC Chart
P0A1A - GENERATOR CONTROL MODULE - DTC CHART
| Description: This DTC sets when the TCM detects the difference between the generator torque estimate and command has exceeded a calibrated threshold, or if the total estimated torque has exceeded a calibrated threshold in the wrong direction. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: Verify the SOBDMC is at the latest calibration level. Clear the SOBDMC DTCs. Repeat the self-test. If the DTC is retrieved again, install a new TCM. Refer to the service information , Automatic Transmission. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the TRID Block for a Replacement TCM. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the service information .Description, Possible Causes and Diagnostic Aids for the DTC. | ||