U1012 - Invalid Internal Control Module Monitoring Data Received From Abs Control Module - DTC Chart

U1012 - INVALID INTERNAL CONTROL MODULE MONITORING DATA RECEIVED FROM ABS CONTROL MODULE - DTC CHART

Description: Network DTC concerns occur during module to module communication.
Possible Causes: Invalid data network concerns - data is transferred within the normal inter-module message, but contains known invalid data. The transmitting module logs a DTC related to the invalid data concern. Missing message network concerns - missing message concerns are logged by the module upon failure to receive a message from another module within a defined retry period.
Diagnostic Aids: Check for other ABS DTCs or ABS related symptoms. Diagnose all other ABS DTCs or ABS related symptoms first. This DTC sets when the SOBDMC receives an invalid minimum powertrain torque limit signal or an invalid total brake torque request signal from the ABS module.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test QD .