U2016 - Control Module Main Software System Internal Failure - DTC Chart
U2016 - CONTROL MODULE MAIN SOFTWARE SYSTEM INTERNAL FAILURE - DTC CHART
| Description: This DTC sets when an internal TCM failure occurs. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: Clear the SOBDMC DTCs. Repeat the self-test. If the DTC is retrieved again, install a new TCM. Refer to the service information , Automatic Transmission. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the TRID Block for a Replacement TCM. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to service information Description, Possible Causes and Diagnostic Aids for the DTC. | ||