LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System) >> Camshaft Position Sensor (CMPS) >> Repair procedures >> Removal >> [Bank 1/Intake]
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

[Bank 1/Intake]

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (B) after removing the clip (A).
  3. Remove the installation bolt (C), and then remove the sensor.
    Fig 1: Identifying Camshaft Position Sensor Connector, Clip And Bolt (Intake)
    G09885908Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals