Pinpoint Test G : Radio Interference
WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the OEM ACM has been replaced with an aftermarket unit, the vehicle may not pass this test. Return the vehicle to OEM condition before following this pinpoint test.
NOTE:
Inspect for any aftermarket accessories that have been added to the vehicle. Check the wiring for these accessories and be sure they have not been attached to the generator circuits and are positioned away from the generator wiring.
- G1 VERIFY THE GENERATOR IS THE SOURCE OF THE RADIO INTERFERENCE
- Start the engine.
- Tune the ACM to a station where the interference is present.
- Ignition OFF.
- Disconnect: Generator C102B .
- Start the engine.
Is the interference present with the generator disconnected?
Yes Refer to the appropriate Audio Systems article for the procedure. No INSTALL a new generator. REFER to Generator . TEST the system for normal operation.