Diagnostic Aids
If DTC U3000:41 or U3000:49 is present, the PSCM removes steering assist, enters into manual mode and transmits an invalid steering angle message over the HS-CAN. The module also sends a message to the IPC to display POWER STEERING ASSIST FAULT in the message center.
| Failure | Action |
|---|---|
| 41 | Go to PINPOINT TEST B |
| 49 | Go to PINPOINT TEST B |
| 62 | Go to PINPOINT TEST C |
| 64 | Go to PINPOINT TEST C |
| 96 | Go to PINPOINT TEST C |