Programming the Auto-Unlock Feature Using the Keyless Entry Keypad
- 1.
Place the ignition in the OFF mode and close all vehicle doors.
- 2.
Enter the factory set 5-digit keyless entry keypad code.
- 3.
Press and hold the 3/4 button on the keypad. While holding the 3/4 button, press and release the 7/8 button. While still holding the 3/4 button, press and release the 7/8 button a second time.
- 4.
Release the 3/4 button. The horn chirps once if auto-unlock is disabled or twice (one short chirp followed by a honk) if auto-unlock is enabled.