Torque Specifications
WARNING: This page is about a different car, the 2016 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - |
| A/C compressor fitting nuts (suction and discharge) | 15 | - | 133 |
| A/C compressor mounting stud | 9 | - | 80 |
| A/C compressor nut | 25 | 18 | - |
| Condenser bolts - 3.5L Ti-VCT | 6 | - | 53 |
| Condenser bolts - 2.0L, 3.5L Gasoline Turbocharged Direct Injection(GTDI) | 8 | - | 71 |
| Condenser fitting nuts (inlet and outlet) | 15 | - | 133 |
| Cross-vehicle beam nuts | 30 | 22 | - |
| Evaporator inlet line fitting nut | 15 | - | 133 |
| Evaporator outlet line fitting nut | 15 | - | 133 |
| Floor duct adapter bolts | 9 | - | 80 |
| Heater core and evaporator core housing bolts | 9 | - | 80 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Radiator bracket bolts | 9 | - | 80 |
| Receiver/drier bolt | 9 | - | 80 |
| Receiver/drier outlet fitting nut | 15 | - | 133 |
| Roll restrictor bracket bolt | 48 | 35 | - |
| Thermostatic Expansion Valve(TXV) bolts | 8 | - | 71 |
| TXV fitting nut | 8 | - | 71 |
| TXV manifold and tube bracket bolt | 15 | - | 133 |
| TXV manifold and tube clamp bracket bolt | 9 | - | 80 |
| Strut tower brace nuts | 30 | 22 | - |