Component Description

BCM 

The BCM requires a PMI when replaced. Refer to: Module Configuration - System Operation and Component Description

DDM or PDM 

The DDM and PDM control the operation of the power door locks, power windows, and the exterior rear view mirrors. They communicate with each other, the BCM, and other modules over the MS-CAN. They also send commands and receive feedback from the Driver Rear Door Module (DRDM) and Passenger Rear Door Module (PRDM) over a private LIN for each module.

• Refer to: Locks, Latches and Entry Systems - Vehicles With: One-Touch Open and Close Front Windows
• Refer to: Glass, Frames and Mechanisms - Vehicles With: One-Touch Open and Close Front Windows
• Refer to: Rear View Mirrors - Vehicles With: One-Touch Open and Close Front Windows - System Operation and Component Description

The DDM and PDM do not require PMI when replaced.

Driver Rear Door Module (DRDM) or Passenger Rear Door Module (PRDM) 

The Driver Rear Door Module (DRDM) and Passenger Rear Door Module (PRDM) control the operation of the power door locks and power windows in the rear sliding doors. They receive commands and send feedback with the corresponding DDM or PDM over a private LIN for each module.

The Driver Rear Door Module (DRDM) and Passenger Rear Door Module (PRDM) do not require PMI when replaced.