Pinpoint Test R : DTC (Diagnostic Trouble Code) B1206:15: Notes
Refer to ELECTRONIC ENGINE CONTROLS SYSTEM - 1.6L GTDI SIGMA for schematic and connector information.
Normal Operation and Fault Conditions
When an impact occurs which exceeds a pre-determined threshold, the BCM sends a signal providing information pertaining to fuel cutoff status on a dedicated circuit to the PCM.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1206:15 | Crash Occurred: Circuit Short To Battery Or Open | A continuous memory DTC that sets in the BCM if the BCM detects an open or short to voltage on the crash event signal output to the PCM. |
Possible Sources
- Wiring, terminals or connectors
- BCM
- PCM