P060B - Internal Control Module A/D Processing Performance - DTC Chart
P060B - INTERNAL CONTROL MODULE A/D PROCESSING PERFORMANCE - DTC CHART
| Description: This DTC sets when an error occurs in the PCM. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: Verify the PCM is at the latest calibration level. Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a replacement PCM. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||