P061C - Internal Control Module Engine Rpm Performance - DTC Chart
P061C - INTERNAL CONTROL MODULE ENGINE RPM PERFORMANCE - DTC CHART
| Description: This DTC sets when a calculation error occurred in the PCM. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: Verify correct operation of the crankshaft position (CKP) sensor, camshaft position 11 (CMP11) sensor and related circuits. Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a replacement PCM. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||