Driver Front Seat Module (DSM): Installation
WARNING: This page is about a different car, the 2016 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
To install, reverse the removal procedure.
- 2.
NOTE:
This step is only necessary when installing a new component.
Using a diagnostic scan tool, complete the PMI process for the DSM following the on-screen instructions.
- 3.
NOTE:
This step is only necessary when installing a new component.
Operate the seat in all directions through the full range of travel to set soft stops.
- 4.
NOTE:
This step is only necessary when installing a new component.
If equipped with memory steering column, operate the steering column in all directions through the full range of travel to set soft stops.