LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2016 >> Escape S >> Repair and Diagnosis >> General Information >> DTC Index >> DTC Index (Anti-Lock Brake System And Stability Control - Engine Cooling System) >> Climate Control System DTCS (EMTC) >> HVAC Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

HVAC Module

NOTE: Some PCM DTCs may inhibit A/C operation. If any PCM DTCs are retrieved, diagnose those first. Refer to the PCM DTC Chart.
DTC INDEX

DTC Description Action
B1081:11 Left Temperature Damper Motor: Circuit Short to Ground GO to Pinpoint Test M
B1081:12 Left Temperature Damper Motor: Circuit Short to Battery GO to Pinpoint Test M
B1083:11 Recirculation Damper Motor: Circuit Short to Ground GO to Pinpoint Test H
B1083:12 Recirculation Damper Motor: Circuit Short to Battery GO to Pinpoint Test H
B1086:11 Air Distribution Damper Motor: Circuit Short to Ground GO to Pinpoint Test I
B1086:12 Air Distribution Damper Motor: Circuit Short to Battery GO to Pinpoint Test I
B10B8:97 Push Buttons: Component or System Operation Obstructed or Blocked Buttons held too long may set this DTC.
ATTEMPT to clean the buttons. CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the self-test.
If the DTC does not return, IGNORE the DTC and CONTINUE diagnosing other Diagnostic Trouble Codes (DTCs) or symptoms.
If the DTC returns, INSTALL a new HVAC control module. REFER to: Heating, Ventilation and Air Conditioning (HVAC) Control Module
B1A61:11 Cabin Temperature Sensor: Circuit Short to Ground GO to Pinpoint Test E
B1A61:15 Cabin Temperature Sensor: Circuit Short to Battery or Open GO to Pinpoint Test E
B1A69:11 Humidity Sensor: Circuit Short to Ground GO to Pinpoint Test E
B1A69:15 Humidity Sensor: Circuit Short to Ground GO to Pinpoint Test E
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to Pinpoint Test P
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to Pinpoint Test Q
U2100:00 Initial Configuration Not Complete: No Sub Type Information INSTALL a new HVAC control module. REFER to: Heating, Ventilation and Air Conditioning (HVAC) Control Module
U2101:00 Control Module Configuration Incompatible INSTALL a new HVAC control module. REFER to: Heating, Ventilation and Air Conditioning (HVAC) Control Module
U3000:00 Control Module: No Sub Type Information INSTALL a new HVAC control module. REFER to: Heating, Ventilation and Air Conditioning (HVAC) Control Module