Key Programming Using Diagnostic Equipment

Programming 

1. 1.
   
   
   NOTE: To enter the PATS security access if no programmed passive keys are available, start a vehicle session using a tear tag or PCM part number. The PATS security access can still be granted even with the ignition off.

   Refer to: Diagnostic Methods .

1. 2.
   
   From the diagnostic scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the on-screen instructions to enter PATS security access.

1. 3.
   
   
   • NOTE: A maximum of 8 keys can be programmed into the vehicle.

     From the diagnostic scan tool menu, select the appropriate key programming procedure and follow the on-screen instructions to program the passive key(s).

   • NOTE: When prompted by the scan tool, place the passive key in the backup starting location.

Courtesy of FORD MOTOR COMPANY