DTC C1B00: Steering Angle Sensor

Failure	Action
09	This DTC sets if the SASM has an internal failure. CARRY OUT the SASM Module Reset function. CYCLE the ignition from ON to OFF and back to ON. DRIVE the vehicle and carry out at least one right turn and one left turn. CARRY OUT the SASM self-test. If the DTC does not return, the repair is complete. If the DTC returns, INSTALL a new SASM-clockspring assembly. REFER to the appropriate Supplemental Restraint System (Except Electric Vehicle) .
29	This DTC sets if the SASM receives information from the SASM that does not agree with other inputs. CARRY OUT the Adaptive Steering Wheel Angle Sensor Trim function. CYCLE the ignition from ON to OFF and back to ON. DRIVE the vehicle and carry out at least one right turn and one left turn. CARRY OUT the SASM self-test. If the DTC does not return, the repair is complete. If the DTC returns, INSTALL a new SASM-clockspring assembly. REFER to the appropriate Supplemental Restraint System (Except Electric Vehicle) .

Failure

Action

This DTC sets if the SASM has an internal failure. CARRY OUT the SASM Module Reset function. CYCLE the ignition from ON to OFF and back to ON. DRIVE the vehicle and carry out at least one right turn and one left turn. CARRY OUT the SASM self-test. If the DTC does not return, the repair is complete. If the DTC returns, INSTALL a new SASM-clockspring assembly. REFER to the appropriate Supplemental Restraint System (Except Electric Vehicle) .

This DTC sets if the SASM receives information from the SASM that does not agree with other inputs. CARRY OUT the Adaptive Steering Wheel Angle Sensor Trim function. CYCLE the ignition from ON to OFF and back to ON. DRIVE the vehicle and carry out at least one right turn and one left turn. CARRY OUT the SASM self-test. If the DTC does not return, the repair is complete. If the DTC returns, INSTALL a new SASM-clockspring assembly. REFER to the appropriate Supplemental Restraint System (Except Electric Vehicle) .