Powertrain Control Module (PCM) DTC Table
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| P06E9 | Engine Starter Performance | For vehicles without push button start, GO to Pinpoint Test A For vehicles with push button start, GO to Pinpoint Test B |
| P0615 | Starter Relay Circuit | GO to Pinpoint Test D |
| P0850 | Park/Neutral Switch Input Circuit | For vehicles without push button start, GO to Pinpoint Test A For vehicles with push button start, GO to Pinpoint Test B |
| P162F | Starter Motor Disabled - Engine Crank Time Too Long | This DTC sets in the PCM when the engine has been cranked for more than a total of 60 seconds without allowing sufficient time for the starter to cool. Diagnose all other DTCs and symptoms. Check the charging system voltage and correct as necessary. Clear the DTC. |
| P2531 | Ignition Switch Run Position Circuit Low | GO to Pinpoint Test E |
| P2532 | Ignition Switch Run Position Circuit High | GO to Pinpoint Test E |
| P2534 | Ignition Switch Run/Start Position Circuit Low | GO to Pinpoint Test F |
| P2535 | Ignition Switch Run/Start Position Circuit High | GO to Pinpoint Test F |
| All Other DTCs | - | REFER to: Electronic Engine Controls |